Oracle Exadata Storage Server X6-2 High Capacity Installation Manual Download Page 19

Page: 19 / 70

About Rack Installation

This section provides an overview of the rack installation procedure.

Note -

The Oracle Exadata Storage Server X6-2 High Capacity is factory installed as part of

your integrated Exadata Database Machine configuration. If you are inserting additional storage

servers into your Exadata configuration, use the rackmounting procedures in this document.

Description

Links

Review the entire installation procedure and find links

to more information about each step.

“Rack Installation Procedure Overview” on page 19

Review rack requirements.

“Rack Requirements” on page 20

Review space requirements for maintenance of the

storage server.

“Maintenance Space Requirements” on page 21

Review configuration restrictions for the Exadata

Database Machine.

“Exadata Database Machine X6-2 Configuration

Restrictions” on page 21

Review configuration restrictions for the Exadata

Storage Expansion Rack.

“Exadata Storage Expansion Rack X6-2 Configuration

Restrictions” on page 22

Rack Installation Procedure Overview

The following table lists the tasks you need to install the Oracle Exadata Storage Server X6-2

High Capacity into a rack.

Step

Description

Links

Review important safety documentation.

Oracle Exadata Storage Server X6-2 High

Capacity Safety and Compliance Guide

Review the storage server rack specifications.

“Rack Requirements” on page 20

Review maintenance space requirements.

“Maintenance Space

Requirements” on page 21

Review configuration restrictions.

“Configuration Restrictions” on page 21

About Rack Installation

Summary of Contents for Exadata Storage Server X6-2 High Capacity







































































Search results

Summary of Contents for Exadata Storage Server X6-2 High Capacity

Reviews:

Related manuals for Exadata Storage Server X6-2 High Capacity

Brands by name

Popular brands

Oracle Exadata Storage Server X6-2 High Capacity, Installation Manual

Search results

Summary of Contents for Exadata Storage Server X6-2 High Capacity

Reviews:

Related manuals for Exadata Storage Server X6-2 High Capacity

Brands by name

Popular brands