Oracle Database Appliance X3-2, Service Manual

Page: 122 / 188

Remove Fan Power Cables
122 Oracle Database Appliance Service Manual • February 2016
b.
Reconnect the power cords to the system and power on the system.
See “Powering On Oracle Database Appliance (Original Version)” on page 142 .
Servicing Server Node Cables
This section includes information on servicing cables in Oracle Database Appliance (original
version).
The internal server node cables are FRUs and can only be replaced by an Oracle-qualified
service technician.
Caution -
Equipment damage.
These procedures require that you handle components that are
sensitive to static discharge. This sensitivity can cause the component to fail. To avoid damage,
ensure that you follow antistatic practices as described in “Performing Electrostatic Discharge
and Antistatic Prevention Measures” on page 34 .
The following topics are covered in this section:
■
“Servicing the Fan Power Cables (FRU)” on page 122
■
“Servicing the PCIe Card Cables (FRU)” on page 124
■
“Servicing the SAS Expander Cable (FRU)” on page 128
■
“Servicing the Boot Disk Backplane Cables (FRU)” on page 130
Servicing the Fan Power Cables (FRU)
Each Oracle Database Appliance (original version) server node has two fans and each fan has a
separate power cable.
Remove Fan Power Cables
1.
Prepare the server node for service.
a.
Attach an antistatic wrist strap.
See “Performing Electrostatic Discharge and Antistatic Prevention Measures” on page 34 .
b.
Remove the server node from the system.