Oracle Database Appliance X3-2, Service Manual

Page: 110 / 188

Remove Disk Midplane Module
110 Oracle Database Appliance Service Manual • February 2016
a.
Power off the system.
See “Shutting Down a Server Node and Powering Off the System” on page 31 .
b.
Disconnect the power cords from the system.
c.
If the system is installed in a rack, remove it.
See the Oracle Database Appliance Owner's Guide for information on racking the system
chassis.
d.
Remove both power supplies from the system.
See “Remove a Power Supply” on page 58 .
e.
Attach an antistatic wrist strap.
See “Performing Electrostatic Discharge and Antistatic Prevention Measures” on page 34 .
2.
Remove all of the front storage drives.
See “Remove a Storage Drive” on page 50 .
3.
Remove both server nodes from the system.
See “Removing Server Nodes From the System Chassis” on page 34 .
4.
Remove the middle section of the system top cover.
See “Removing the Middle Section of the System Top Cover” on page 36 .
5.
Loosen the two captive Phillips screws that secure the side-wall cover to the
chassis and remove the cover.