Oracle Database Appliance X3-2, Service Manual

Page: 50 / 188

Remove a Storage Drive
50 Oracle Database Appliance Service Manual • February 2016
The following table shows the location and numbering of the boot drives.
Callout Drive Locations and Identification
1 Boot Drives at the back of server node 1. Location and identification of the server node 1 boot drives as
listed in Oracle ILOM:
■
/SYS/MB/RHDD1
■
/SYS/MB/RHDD0
2 Boot Drives at the back of server node 0. Location and identification of the server node 0 boot drives as
listed in Oracle ILOM:
■
/SYS/MB/RHDD1
■
/SYS/MB/RHDD0
Remove a Storage Drive
1. Identify the storage drive that you want to remove.
If a drive has failed, its amber Service Required LED will be lit. For information on drive status
LEDs, see “Storage and Boot Drive Status Indicators” on page 21 . For specific drive locations,
see “Storage and Boot Drive Locations” on page 48 .
2.
Remove a storage drive.
a. On the drive you plan to remove, push the storage drive release button to
open the latch [1].
b. Grasp the latch and open it to a 45 degree angle [2].
c. Using the latch, slowly pull the drive straight out of the drive slot, not
sideways or vertically.