Oracle 7105393 Installation Manual Download Page 6

Page: 6 / 42

Contents

▼ To Verify Attached Storage (Oracle Solaris) .......................................... 28

Configuring the HBA for Hot-Plug Operation .................................................... 29

▼ To Configure the HBA for Hot-Plug Operation ...................................... 29

Removing the Hardware ................................................................................. 29

▼  To Prepare the HBA for Removal Using the HBA Attention Button ........... 30
▼  To Prepare the HBA for Hot-Plug Removal (Oracle Solaris) ..................... 30
▼  To Remove the HBA Hardware .......................................................... 31

3 HBA Software Installation

............................................................................. 33

Installing Utilities for Updating the BIOS and Firmware ....................................... 33

▼ To Install Utilities for Updating the BIOS or Firmware: ........................... 34

Installing Diagnostic Software ......................................................................... 34

Diagnostic Support for the Oracle Solaris OS ............................................. 34
Diagnostic Support for All Other Supported Operating Systems ..................... 35
Using the OneCommand Manager CLI for Troubleshooting a Fatal Error ......... 36

Installing Drivers ........................................................................................... 36

Installing Drivers for the Oracle Solaris OS ............................................... 37
▼ Installing Drivers for All Other Supported Operating Systems ................... 37

4 Known Issues

................................................................................................ 39

Server Compatibility Issues ............................................................................. 39

Cannot Detect the HBA on the Sun Blade T6300 System .............................. 39
Cannot Verify the FCode Version of the HBA on the Sun Blade T6300 and

T6320 Systems ..................................................................................... 40
Cannot Boot-From-SAN on the Sun Blade X6250 System ............................ 40
HBA Fails to Properly Disconnect During a Hot-Plug Operation on a Sun

Blade T6320 System .............................................................................. 41
HBA Does Not Correctly Map Ethernet Settings on a Sun Blade X6250

System ................................................................................................. 41
On the Sun Blade X6275 System, Default HBA Settings Do Not Allow Boot-

From-SAN Through FC Ports .................................................................. 42

StorageTek Dual 8Gb FC Dual GbE HBA, ExpressModule, Emulex Installation Guide For HBA Models SG-

XPCIEFCGBE-E8-Z, SG-PCIEFCGBE-E8-Z, SG-XPCIEFCGBE-E8-N, SG-PCIEFCGBE-E8-N and 7105393 • August

2018

Summary of Contents for 7105393











































Search results

Summary of Contents for 7105393

Reviews:

Related manuals for 7105393

Brands by name

Popular brands

Oracle 7105393, Installation Manual

Search results

Summary of Contents for 7105393

Reviews:

Related manuals for 7105393

Brands by name

Popular brands