To Prepare the HBA for Removal Using the HBA Attention Button
1. Either halting the operating system and removing power from the server blade, or preparing
the HBA for hot-plug removal with one of the following:
■
The HBA Attention button
■
The Oracle Solaris OS
■
The Windows Server OS using the Safely Remove Hardware menu
2. Removing the HBA hardware.
To Prepare the HBA for Removal Using the HBA
Attention Button
1.
Attach an antistatic wrist strap (refer to
2.
Press and release the Attention button near the bottom of the HBA front panel.
The green Power OK LED near the button will blink for approximately five seconds, indicating
that the HBA is being prepared for removal.
If you want to cancel the operation, press the Attention button again before the LED stops
blinking.
3.
After the Power OK LED turns off, remove the HBA.
To Prepare the HBA for Hot-Plug Removal (Oracle
Solaris)
If you want to remove the HBA without first halting the operating system and removing power
from the associated server blade, prepare the HBA for removal as follows:
1.
Use the
cfgadm
command to identify the HBA to be removed.
cfgadm
Ap_Id Type Receptacle Occupant Condition
pcie1 pci-pci/hp connected configured ok
pcie2 pci-pci/hp connected configured ok
2.
Use the
cfgadm -c unconfigure
command to unconfigure the attachment point ID
(
Ap_Id
) for the HBA.
30
StorageTek Dual 8Gb FC Dual GbE HBA, ExpressModule, Emulex Installation Guide For HBA Models SG-
XPCIEFCGBE-E8-Z, SG-PCIEFCGBE-E8-Z, SG-XPCIEFCGBE-E8-N, SG-PCIEFCGBE-E8-N and 7105393 • August
2018
