manualshive.com logo in svg

Oracle 7105393, Installation Manual

Share
Download
Oracle 7105393 Installation Manual Download Page 34

To Install Utilities for Updating the BIOS or Firmware:

To Install Utilities for Updating the BIOS or

Firmware:

1.

Go to the Emulex (now Broadcom) support site for Oracle at:

https://www.broadcom.com/support/oem/oracle-fc/

2.

Click the type of HBA, and then click the model number of the HBA for which you

want to install utility software.

3.

In the Utilities section, click the utility for the OS that you want, and download

the utility to a local file system.

4.

Install the utility as described in the Emulex documentation, located on the

Emulex (Broadcom) web site.

Installing Diagnostic Software

This section contains the following topics:

■

“Diagnostic Support for the Oracle Solaris OS” on page 34

■

“Diagnostic Support for All Other Supported Operating Systems” on page 35

■

“Using the OneCommand Manager CLI for Troubleshooting a Fatal Error” on page 36

Diagnostic Support for the Oracle Solaris OS

Diagnostic support for the HBA is included in the Oracle VTS software. The Oracle VTS

software is available for download at: 

https://support.oracle.com/

For information about the Oracle VTS software, see the Oracle VTS documentation at: 

http://

docs.oracle.com/cd/E19719-01/index.html

The 

emlxtest

 utility, which is included in the Oracle VTS software, supports the following

functions:

■

Connectivity verification

■

Firmware version and checksum test

■

Self-test

■

Loopback tests

34

StorageTek Dual 8Gb FC Dual GbE HBA, ExpressModule, Emulex Installation Guide For HBA Models SG-

XPCIEFCGBE-E8-Z, SG-PCIEFCGBE-E8-Z, SG-XPCIEFCGBE-E8-N, SG-PCIEFCGBE-E8-N and 7105393 • August

2018

Summary of Contents for 7105393











































Reviews:

No comments

Brands by name

Popular brands

Load more brands