To Modify the BIOS Menu
Workaround:
Reboot the system.
Cannot Verify the FCode Version of the HBA on
the Sun Blade T6300 and T6320 Systems
Bug 15471696
Issue:
The FCode version is not displayed when you issue the
luxadm fcode -p
command
from either a Sun Blade T6300 or T6320 system.
Workaround:
To view the FCode version, issue the
fcinfo hba-port
command.
Cannot Boot-From-SAN on the Sun Blade X6250
System
Bug 15591000
Issue:
The ILOM/BIOS of the Sun Blade X6250 system disables the ExpressModule 0 and
1 BIOS Option ROM. This prevents the Emulex Lightpulse x86 BIOS banner from being
displayed upon boot of the Sun Blade X6250 system.
Workaround:
Modify the BIOS menu by doing the following:
To Modify the BIOS Menu
1.
Boot the Sun Blade X6250 system.
2.
In the BIOS menu, press the F2 key for setup.
3.
From the BIOS Boot menu, select [Enabled] for all of the EMx FUNx OPTION
ROM settings.
4.
Press the F10 key to save the BIOS settings and reboot the Sun Blade X6250
system.
The Emulex Lightpulse x86 BIOS banner will be displayed, allowing you to configure Boot-
from-SAN.
40
StorageTek Dual 8Gb FC Dual GbE HBA, ExpressModule, Emulex Installation Guide For HBA Models SG-
XPCIEFCGBE-E8-Z, SG-PCIEFCGBE-E8-Z, SG-XPCIEFCGBE-E8-N, SG-PCIEFCGBE-E8-N and 7105393 • August
2018
