Oracle 3.2 TB NVMe, User Manual, Page: 36 / 48

NVMe Drive Service Overview
energy storage components are designed for the life of the Oracle 3.2 TB NVMe SSD and do
not require periodic maintenance.
Note -
Refer to the server documentation for additional NVMe Storage Drive service and
firmware download information. Refer to the servers service manual for SSD detailed removal
and replacement instructions.
Component Serviceability
The following service actions can be performed on a 3.2 TB NVMe SSD.
■
Unmount an NVMe Storage Drive
■
Remove an NVMe Storage Drive From the Server
■
Verify Removal of an NVMe Storage Drive
■
Install an NVMe Storage Drive in the Server
■
Power On an NVMe Storage Drive and Attach a Device Driver
Components are either hot serviceable or cold serviceable. Hot service capability allows you
to safely remove this component while the server is running after a device orderly shutdown.
The Oracle Flash Accelerator F320 PCIe Card supports PCIe presence detect and link-up detect.
Cold service capability requires a powered off state, so you need to remove power from the
server.
Components are designated either CRU (customer-replaceable unit) or FRU (field-replaceable
unit). CRU service capability allows trained technicians and authorized field service personnel
to service this component. FRU service capability allows only authorized service personnel to
service this component.
Refer to the server documentation for additional service information.
The following table lists the serviceability of NVMe components and directs you to
replacement instructions.
Component Serviceability Replacement Instructions
Oracle 3.2 TB NVMe SSD (and
fillers)
Hot
CRU
“Installing the NVMe Storage
Drive” on page 31
“Replace An Existing NVMe Storage Drive
(CRU)” on page 37
36 Oracle 3.2 TB NVMe SSD User Guide • July 2016