Oracle 3.2 TB NVMe, User Manual

Page: 12 / 48

Oracle 3.2 TB NVMe SSD Overview
Related Information
■
“Specifications” on page 14
■
“Product Overview” on page 9
■
“Servicing the NVMe Drive Using Oracle Hardware Management Pack” on page 43
Status Indicators
Use the Oracle 3.2 TB NVMe SSD status indicators to determine the status of each drive
and perform service actions as required. Three status indicator LEDs are located on the drive
bracket to indicate status and diagnose NVMe storage drive issues.
The following illustration shows status indicator LEDs for Oracle 3.2 TB NVMe SSD.
Indicator Color Status
(1)
Ready
to
Remove
Blue ■ OFF – The drive has not been prepared for removal. Normal operation.
■ STEADY ON – The drive is in standby power state. The drive can be removed safely
during a hot-plug operation. A lit Ready to Remove indicator indicates that service
action is allowed on the drive.
(2)
Service
Action
Required
Amber ■ OFF – Normal operation.
■ STEADY ON – Service action is required. The system has detected a fault with the
drive.
■ BLINKING – Locater. Status indicator blinks on and off to locate drive.
(3)
Power/
OK/
Activity
Green ■ STEADY ON (does not blink) – Drive is engaged and is receiving full power. Normal
operation.
■ RANDOM BLINKING – There is drive activity. Status indicator blinks on and off to
indicate activity.
■ OFF – Power is off, or installed drive is not recognized by the system.
12 Oracle 3.2 TB NVMe SSD User Guide • July 2016