Oracle 1242 User Manual Download

Page: 20 / 84

Grounding Requirements

Grounding Requirements

For proper operation and safety, all powered rackmounted equipment must be properly

grounded. All PDUs, branch wiring, and receptacles must be listed as grounding-type devices.

Connect each component and PDU into reliably grounded outlets.

Caution -

To reduce the risk of electric shock or damage to installed equipment, never disable

the grounding plug on any power cord.

For additional grounding, attach an earth ground cable to the rack. See

“Attaching a Grounding

Cable” on page 59

for instructions.

Related Information

■

“Packaging Dimensions” on page 16

■

“Oracle Rack Cabinet 1242 Dimensions” on page 16

■

“Oracle Rack Cabinet 1242 Weights” on page 17

■

“Access Route Guidelines” on page 18

■

“Power Requirements” on page 19

■

“Airflow Precautions” on page 20

■

“ESD Precautions” on page 21

Airflow Precautions

Caution -

Proper airflow is essential for keeping the equipment's internal temperatures within a

safe operating range.

Air flows from the front to the rear of the equipment.

Oracle Rack Cabinet 1242 User's Guide • July 2018

Summary of Contents for 1242





















































































Search results

Summary of Contents for 1242

Reviews:

Related manuals for 1242

Brands by name

Popular brands

Oracle 1242, User Manual

Search results

Summary of Contents for 1242

Reviews:

Related manuals for 1242

Brands by name

Popular brands