Oracle 1242 User Manual Download

Page: 32 / 84

Rack Packaging

Steps

Description

Links

Locate the top cable window.

“Top Cable Window” on page 27

(Optional) Attach a grounding strap.

“Servicing Grounding Straps” on page 55

Related Information

■

“Rack Packaging” on page 32

■

“Tools Required” on page 33

■

“Move the Rack to the Installation Site” on page 35

■

“Stabilize the Rack (Leveling Feet)” on page 36

Rack Packaging

Before unpacking the rack from the shipping carton, refer to the labels on the carton and to the

instructions that they provide. After unpacking the rack, follow local laws and guidelines to

recycle the packaging properly.

Caution -

Carefully unpack the rack from the packaging and shipping pallet. Rocking or

tilting the rack can cause it to fall over and cause serious personal injury or death. Always use

professional movers when unpacking and installing the rack.

Note -

After unpacking the rack from the packaging, save the shipping brackets used to secure

the rack to the shipping pallet. Do not dispose of these brackets, because you cannot order

replacement brackets.

Caution -

Shipping brackets are not for use for bracing or anchoring the rack during seismic

events.

The packaging is suitable for shipping racks with factory-installed or customer-loaded

equipment.

Oracle Rack Cabinet 1242 User's Guide • July 2018

Summary of Contents for 1242





















































































Search results

Summary of Contents for 1242

Reviews:

Related manuals for 1242

Brands by name

Popular brands

Oracle 1242, User Manual

Search results

Summary of Contents for 1242

Reviews:

Related manuals for 1242

Brands by name

Popular brands