LOCATION OF SPARE WHEEL
37
INTERNAL CARE FOR YOUR OPUS
®
IMPORTANT! ENSURE THE COOKER/HOB UNIT HAS COOLED COMPLETELY BEFORE
ATTEMPTING TO CLEAN.
•
All units in the Camper should be kept clean for maximum longevity; stains can be wiped off
with a small cloth. A damp cloth may be all that is required to remove most stains.
•
Wipe off any spills and water residue on the units as soon as they occur to prevent damage to
them or other features of the Camper such as the electrics.
•
AVOID using abrasives including sponge scourers to clean the units as these may cause scratches
and issues with the finish of the units.
•
AVOID placing hot objects/containers (cups/saucepans etc.) on the units directly; use a suitable
mat/cover to prevent marking the surfaces of the units.
•
When packing down the Camper, pack the units with adequate protection/padding (especially
the middle shelves and table top) and avoid a layout which may encourage sliding of the units and
shelves whilst in transit as this may result in issues with the finish.
•
The cushions inside your OPUS
®
Camper are durable and simply require proper care and use.
•
Clean off stains and dirt on the cushions as soon as they occur, this can easily be done using a
damp cloth. Avoid soaking the cushions or prolonged exposure to water and ensure it is
thoroughly dry before packing the Camper.
•
Vacuum the cushions (and the trailer) regularly or as often as needed depending on level of use.
Pay extra attention to the trims as these may contain some dirt or undesirable items.
•
AVOID stepping on the cushions with shoes or placing dirty items on them.
Depending on the optional accessories fitted to your OPUS
®
you will find all relevant paperwork/
manuals for these in the middle drawer of the kitchen area. Please read all of the relevant
information within these user manuals to ensure correct usage.
SPARE WHEEL & CARRIER (OPTIONAL)
If you have the Spare Wheel and Carrier fitted (optional extra) ensure it is fit for use.
It is secured by a 19mm hex bolt which can be loosened using the wheel wrench supplied with
your Camper.
IMPORTANT! YOU MUST ENSURE THE SPARE WHEEL
CARRIER BOLT IS FULLY TIGHTENED TO A TORQUE
SETTING OF 86Nm and THAT THE SPRING WASHER IS
REFITTED.
IMPORTANT! ENSURE THE SPARE WHEEL PRESSURE
IS
CHECKED
REGULARLY.
THE CORRECT PRESSURE IS 44 PSI or 3 BAR.
