manualshive.com logo in svg

Opus OFC195C, Owner'S Handbook Manual, Page: 36 / 48

Share
Download
Opus OFC195C Owner'S Handbook Manual Download Page 36

STORAGE, MAINTENANCE & SPARE WHEEL.

STORAGE

IMPORTANT! THE OPUS

®

 CAMPER MUST NOT BE STORED WITH A WET OR DAMP 

INTERIOR. IF PACK DOWN WAS UNAVOIDABLE IN WET OR DAMP CONDITIONS, THE 
CAMPER MUST BE OPENED UP WITHIN 24 HOURS AND FULLY LEFT TO DRY INTERNALLY 
AND EXTERNALLY (TENT) BEFORE BEING REPACKED AND STORED UNDER THE ROOF 
COVER PROVIDED. PLEASE ALSO CONSIDER YOUR AWNING/CANOPY CANVAS.

IF THE OPUS

®

 IS ERECTED FOR LONG PERIODS, PLEASE INSPECT REGULARLY FOR SIGNS OF 

WATER INGRESSION AND THE EFFECTS OF DAMP. REFER TO ‘CARING FOR YOUR CANVAS’ 
WITHIN THE USER MANUAL. 

Pack down the Camper correctly and ensure nothing is out of place e.g. no poles retracted in a manner 
that can result in a kink or the canvas becoming snagged.

If it is unavoidable to pack down your OPUS

®

 when the canvas is wet/damp, the Camper MUST be 

opened up within 24 hours and FULLY left to dry off BEFORE being stored.

It is advisable to store the Sun Canopy and its poles inside the trailer.

If you have an awning, it can also be stored in the trailer. To do this, ensure it is packed and stored 
properly. DO NOT store a wet/damp awning inside the Camper. If your payload/packing prohibits 
the awning pieces to be stored together, fold the individual pieces and store neatly in with the 
units maximising the use of space.

The front edge of the roof cover fits into an aluminium awning channel on the front panel of the 
Camper. This provides a secure fit-ment and MUST be attached in this manner when using the 
cover in transit. 

The roof cover MUST be used whenever you are not using your OPUS

®

.

IF YOUR OPUS

®

 HAS BEEN STORED OR TRANSPORTED IN HEAVY WEATHER CONDITIONS 

WITHOUT THE ROOF COVER, IT NEEDS TO BE OPENED AND INSPECTED FOR WATER 
INGRESS AS SOON AS POSSIBLE. THIS IS TO ENSURE THE SEALS WERE CORRECTLY SEATED 
DURING THE PACK-DOWN AND THAT THEY HAVE NOT BEEN DAMAGED WITH TIME. 

The larger storage cover (optional extra) is advised for an extended period of storage to keep your 
camper in pristine condition. 

It is strongly advised you clean off dirt and grime on the unit from travelling/terrain to keep your 
Camper in good condition and maximise its longevity. 

If you have a battery fitted consider using a suitable charger/conditional to prolong the life of your 
battery.

Ensure the water and waste carriers are emptied after each use and contain no liquids if being 
stored.

RETURN TO THE ROAD

Ensure that your Camper and accessories are fit for the road and you adhere to all local laws.

Check the wheels and tyres and ensure they are in good condition with the bolts correctly torqued. 
Check the tyre pressures before driving - 44 PSI / 3 BAR

33

Summary of Contents for OFC195C

















































Reviews:

No comments