10
5.
Release the four clamps that secure the lids of the OPUS
®
.
6.
Open the front lid through 180°, gas struts are fitted to aid the process and support the weight
of the lid at this stage.
7.
Open the rear lid through 180°.
8.
At this stage walk around the OPUS
®
and inspect the tent to ensure that the canvas is properly
located within the aluminium channels and that no part of the tent is caught or snagged.
9.
Lift up the ends of each bed support leg into the corresponding bracket on the now unfolded
lids, line up the holes and insert the pull pin. Ensure all pins are fully inserted. You may find it
easier to move the lid during this process to aid aligning the holes.
10
. Fit each corner of the canvas over the corner of each bed tray, the seam on the canvas should
line up with each corner of the bed lid.
UNSTRAP WATER & WASTE CARRIERS
POSITION CARRIERS
TURN ON THE GAS
RELEASE THE CLAMPS
OPEN ALL FOUR CLAMPS
OPEN FRONT LID
OPEN REAR LID
EXTERNAL TENT INSPECTION
4.
4.1
4.2
5
5.1
6.
7.
8.