SETTING UP THE KITCHEN AREA
1.
Position the hob unit (Page 3. No.4) onto the kitchen base unit so that the unit sits either side
of the two clips built into the base platform. Secure the unit to the platform using the clips.
2.
Position the sink unit (Page 3. No.2) onto the kitchen base unit so that the left hand side is
against the front wall of the Camper; the cut-out corner of the unit should sit around the tent poles.
3.
Locate the lower middle shelf onto the battens on the side of the sink and hob units; there
are small metal studs protruding from the battens to secure this in place, a light pressure maybe
required to properly sit the shelf onto the studs.
4.
Fit the top middle shelf section of the kitchen worktop and secure it in the same manner using
the studs.
5.
Fit the waste water outlet hose (grey) underneath the sink unit into the waste water aperture
on the kitchen base unit.
SECURE THE INNER TENT CLIPS
FITTING THE RIDGE POLE
SECURE THE TENT ELASTIC BUNGEE
13
COMPLETED KITCHEN SET UP. CLIPS TO SECURE HOB UNIT.
9.
10.
11.
1-4
