Accessories:
The following accessories are supplied with the MasterPress 01:
Stand: Flat packed for assembly on site by purchaser.
Tool set ( Allen key screwdriver 8mm. for removing equipment from the pallet,
small screwdriver frame screws and tweezers holding typeface letters.)
Standard Frame size 174x300mm with 4 guides
Components & parts supplied with equipment
5 off. Standard Base Frame
5 off. Set of Singe Frames 4mm
5 off. Set of Singe Frames 5,5mm
5 off. Set of Singe Frames 9mm
1 off. Single Frame holder
2 off. Additional resistance angles for side guides
12 off. Screws for regulating print & stamp bed
4 off. pins
,
2 smaller and 2 bigger sets of catches
1 off. metal pole
Technical data:
Rated voltage:
AC. 220-240V 50-60 Hz
Maximum power load:
1800W
Average power load:
400W
Dimensions of the equipment:
D 528 x W 408 x H 680 mm
Dimensions of the package:
D 745 x W 450 x H 835 mm
Dimensions of the stand:
D 510 x W 490 x H 625 mm
Net weight of the machine:
100kg
Gross weight of the machine:
107kg
Net weight of the stand:
25kg
Heater surface:
218 x 308 mm.
Maximum stamping pressure:
5T
Operating temperature:
100
°C
Temperature adjustment range:
0
°C -150°C
Temperature stabilization:
microprocessor