optris Xi 400 Operator'S Manual Download Page 90

Page: 90 / 120

7.1 Installation and initial start-up

•

All drivers are booted via Windows OS automatically. A driver installation is not necessary.

•

By default, the program starts automatically in the installed language.

1. Insert the included USB stick into the according port on your computer.

2. Please start

Setup.exe

. Follow the instructions of the wizard until the installation is finished.

The installation wizard places a launch icon on the desktop and in the start menu:

Start\Programs\Optris GmbH\PIX Connect

3. To connect the camera to the PC, plug the USB cable to the camera first. Afterwards connect it with

the PC (to disconnect the camera and the computer remove the USB cable from the computer first
and then disconnect it from the camera).

4. Start the software.

At the initial start the software asks for the calibrations files which are available via internet or on the
USB stick (only for Xi 400).

With the Xi 80/410, the calibration files are already included in the

device.

Summary of Contents for Xi 400

























































































































Search results

Summary of Contents for Xi 400

Reviews:

Related manuals for Xi 400

Brands by name

Popular brands

optris Xi 400, Operator'S Manual

Search results

Summary of Contents for Xi 400

Reviews:

Related manuals for Xi 400

Brands by name

Popular brands