OPTO-EDU (BEIJING) CO., LTD.
www.cnoec.com.cn Page 20 of 51 [email protected]
3.2.2.
Starting and Shut down
Figure 3-5 Click“SE”
1. Run the SEM operating software.
2. Click “SE” in the upper right corner of the control interface to open the
SEM operating software.
(The configuration information when the last use is opened by default)
Figure 3-6 Click“VAC”To Closc
1.
To close software, click ”VAC”
。
2.
Wait until all indicator lamp power off
3.
Close software (The last used configuration information will be saved
automatically.)
3.2.3.
Function buttons
The scan control window function button and status display are shown in
Figure 3 7. The function buttons indicate the meaning as shown in Table 3 1.
。
Figure 3-7 Scan Windows Function Keys & Displays
