- 1 -
ATTENTIONS
1.
Disassembly only by the professionals.
The microscope has been adjusted before shipping, Unprofessional-person should
not disassemble and remove any other parts.
If you have any questions, please contact with manufacturer or local distributor.
2.
Note the input voltage if identical with
operating voltage of
instruction.
This instrument designed for wide input voltage (100V~240V,47~63HZ), applicable
to most area .But if the supply voltage exceeds this range, the instrument will be
seriously damaged.
3.
Use in safe way, prevent burns and fire.
When the
Instrument
power in working,
temperature of bulb and lamp house
will rise
sharply to meet the heat balance, so
pay attention to anti-hot logo in case of be burned.
Bulb should be replace after cool down .
Do not use alcohol, gasoline, paper and other combustibles near the
instrument
, to
prevent a fire! !
4.
Notes on replacing the bulb.
The instrument used with 12V /20W imported halogen lamp of G4, replacement
should be used the same specifications of the bulb, or it may cause equipment
damage.
Before replacing the lamp, must turn off power switch, and unplug it in case of
electric shock.!
Please don’t put finger mark
、
dust or oil strain etc on the bulb when In
replacement.
5.
Requirements for handling and using environment
Please cut off the power and unplug the power plug before moving. Be careful not to
crush your finger when placed.
This instrument is a precision instrument, and it should be handle with care, severe
shock can cause serious damage to the inner related parts.
The required available environment for using of the equipment:
Indoor temperature: 0
℃
~ 40
℃
Maximum relative humidity: 85%
High temperature or high humidity
may
cause mildew, fog or dew of the optical
components, will result in the instrument not work.
6.
For the protection of the environment, please properly handle the
microscope packing waste (such as: cardboard, foam, etc. )!
Summary of Contents for A15.2604
Page 13: ...12 B Pol Polarizing Microscope...
