CHAPTER 1: WELCOME
SNAP PAC Redundancy Option User’s Guide
5
5
About this Guide
Chapter 1: Welcome—
Introduces the SNAP PAC Redundancy Option, provides information about
this guide, where to find additional information, and how to reach Opto
22 Product Support.
Chapter 2: Connecting the Hardware—
Describes how to connect the serial, Ethernet, and power
cables for critical devices used in a redundant system.
Chapter 3: Configuring a Control System—
Provides instructions on how to use PAC Control, PAC
Manager, and the SNAP-PAC Arbiter to configure the controllers and arbiter.
Chapter 4: Creating a Strategy with Controller Redundancy—
Describes how to use the Redundancy
Option features in PAC Control to create a transactional chart.
Chapter 5: System Maintenance—
Describes how to change an IP address on a controller or arbiter,
load new firmware, reset the arbiter, use the PAC Redundancy Manager advanced features, and
various other system maintenance tasks.
Related Documentation
For more information on topics related to the SNAP PAC Redundancy Option, see the following
Opto 22 documents
For this information
See this guide
Form
How to install and use SNAP PAC S-series
controllers
SNAP PAC S-Series Controller User’s Guide
How to install and use PAC Control
Detailed information about each command
(instruction) available in PAC Control
.
All documents are available on our website,
. The easiest way to find a document
is to follow the link above or search on its form number.
Product Support
If you have any questions about using SNAP PAC Redundancy Option, you can call, fax, or email
Opto 22 Product Support. Product support is free.
Phone:
NOTE: Email messages and phone
calls to Opto 22 Product Support
are grouped together and
answered in the order received.
800-TEK-OPTO (800-835-6786 toll-free
in the U.S. and Canada)
951-695-3080
Monday through Friday,
7 a.m. to 5 p.m. Pacific Time
Fax:
951-695-3017
Email:
Opto 22 website:
