CREATING A REDUNDANT STRATEGY
SNAP PAC Redundancy Option User’s Guide
38
3.
Click Modify.
The Select Control Engine dialog box appears.
This dialog box lists all the control engines configured on your system, whether or not they are
associated with your strategy.
4.
Highlight the control engine’s name and then click Modify.
The Control Engine Configuration dialog box appears.
5.
Under System Type, select Redundant Controllers.
New Settings options appear.
6.
Using the IP addresses you created earlier, enter the IP address for Controller 1, Controller 2, and
the Arbiter, then click OK.
NOTE: These are the addresses you configured previously for the controllers and arbiter. See
a Primary IP Address to ENET 1 on each Controller” on page
“Assigning an IP Address to the
.
