SRO70 Installation Manual 100918
5
v
Mount Processor
Step 1
Mount the system with 2 screws (user-supplied) to the attachment
keyholes shown below. Use anchors or attach directly to studs. Be sure to
allow 3” clearance below cartridges for removal.
Step 2
Route the loose end of 1/4” black tubing (from processor) to a suitable
drain and fasten it at the drain. (Some locations may require an
approved air gap. Optional OptiPure air gap is available, part number
164-89905).
v
Make Drain Connection
Use keyholes in bracket