SRO70 Installation Manual 100918
4
v
SRO70-2 Installation Diagram
Feed Water Line -
Green 3/8” - from Feed Water
Valve to Feed Water Inlet
Feed
Water
Feed Water
Inlet
Drain Line
- Black 1/4” - from Membrane
Reject Connection to Drain
Reject Water
(to Drain)
User-Supplied
Feed Water Valve
Membrane Reject/
Drain Connection
Optimized
Water Outlet
Auxiliary
Filtered
Water Outlet
(Plugged if not in use)
CTO-Q10 Pre-Filter
CTO-Q10 Post-Filter
AMS-Q10 Membrane
Cartridge
1
3
2
Water
Processor
To Tank
Connection
When installing, keep line from the Tank
to the equipment as short as possible to
minimize pressure loss. Avoid loops or
kinks in tubing. Do not cut tubing with
wire crimpers or dikes.
IMPORTANT - PROTECT PROCESSOR AND
TANK FROM THE ELEMENTS. DO NOT
INSTALL IN DIRECT SUNLIGHT OR WHERE
EXPOSED TO FREEZING TEMPERATURES OR
RAIN.
Optimized Water to
Equipment
(Optional) Filtered
Water to Equipment
Optimized Water Line to Tank
- Blue 3/8” - from Processor “To Tank” Connection
to Tank Inlet
Optimized
Water Line
- Blue 3/8”
- Make connection
to distribution.
(Optional) Filtered Water Line
- Green 3/8” - Make connection to distribution.
Storage
Tank Inlet
(on valve)
Optimized Water
Storage Tank
- 2 gal. bladder
Storage Tank
Valve
(Normally Open)