Optinet QuantumVu, User Manual

Page: 19 / 72

1. To Wall (Video In) or WPS (not shown) –
Connects the
set-top to in-house coaxial wiring, if applicable.
2. Network –
Connects to the Ethernet (CAT-5) network at
your home, if applicable.
3. YPbPr –
Connects the set-top to the component video
input (YPbPr) on the HDTV.
4. Video & Audio Out (L/R)–
Connects to composite input
on your HDTV or SDTV. Note: Two video output connectors
are provided. Typically, one output is connected to the
television set, and the other output is used to connect to a
home theater system, DVD recorder, or VCR.
Connects RCA-type cables to Audio Out to send analog
audio signals (left and right) to a television set with stereo
inputs or to a stereo amplifier. Note: Two sets of audio out
connectors are provided. Typically, one set of outputs is
connected to the television set, and the other set is used
to connect to a home theater system, DVD recorder, or
VCR.
5. To TV (Video Out) –
Connects to the television.
6. Optical –
Connects an optical cable to send a digital
audio signal to a surround-sound set-top or other digital
audio device.
7. HDMI –
Connects an HDTV HDMI™ (High-Definition
Multimedia Interface) cable from the HDTV to the HDMI
port. HDMI supports both digital audio and video.
8. Power –
Connects the DC output of the AC power
adapter (provided) to deliver power to the set-top. Use
only the AC power adapter provided with the set-top.
19