Optinet QuantumVu, User Manual

Page: 11 / 72

11
FRONT PANEL
1. Power -
The Power LED displays the Residential Gateway’s
(RG) current status. If the Power LED glows steadily green,
the RG is receiving power and fully operational. When the
Power LED is rapidly flashing, the RG is initializing. If the Power
LED is glowing red when the Power cord is plugged in, the
RG has suffered a critical error and technical support should
be contacted. If the Power LED is flashing red, the RG is
performing a firmware update.
2. DSL -
Not used
3. WAN Ethernet -
When the WAN Ethernet LED glows steadily,
the RG is connected to an Ethernet WAN. When it flashes, it
signifies that data traffic is traveling across the connection.
4. Internet -
When the Internet LED glows steadily, the RG is
connected to the provider. When it flashes, data traffic is
passing across the RG.
5. LAN Ethernet -
The LAN Ethernet LEDs illuminate when the
RG is connected to another device via one of its LAN Ethernet
ports. When one of the LAN Ethernet LEDs flashes, data traffic
is passing across the corresponding connection.
6. HPNA -
The HPNA LED illuminates when the RG is connected
to another device via its HPNA port. When it flashes, data
traffic is passing across the connection.
7. USB -
Not used.
8. Wireless -
Not used.
9. WPS Button -
Not used.
10. Model Number
BACK PANEL
11. Line Port -
Not used.
12. HPNA Port -
The HPNA port is used to connect the RG to Set
Top Box(es).
13. LAN Ethernet Ports (4) -
The LAN Ethernet ports are used
to connect computers to the RG via Ethernet cable. The
Ethernet ports are 10/100/1000 Mbps auto-sensing ports, and
either a straight-through or crossover Ethernet cable can be
used when connecting to the ports.
14. WAN Ethernet Port -
The WAN Ethernet port is used to
connect the RG to a BVU’s network.
15. 15. USB Port -
Not used.
16. Reset Switch -
Not used. (Please do not press)
17. Power Port -
The Power port is used to connect the Power
cord to the RG.
WARNING! Do not unplug the Power cord from the RG
during the reset process. Doing so may result in permanent
damage to the Modem Router.
18. Antennas
!