Optinet QuantumVu, User Manual

Page: 15 / 72

1. To Wall (Video In) or WPS (not shown) –
Connects the
set-top to in-house coaxial wiring, if applicable.
2. Network –
Connects to the Ethernet (CAT-5) network at
your home, if applicable.
3. eSATA Port –
eSATA connector. (optional)
4. S-Video –
Connects an S-Video cable to send an S-Video
signal to your television set, VCR, or DVD recorder. This
signal is standard definition but higher quality than other
standard-definition connections.
5. Optical –
Connects an optical cable to send a digital
audio signal to a surround-sound set-top or other digital
audio device.
6. YPbPr –
Connects the set-top to the component video
input (YPbPr) on the HDTV.
7. Video Out –
Connects to composite input on your HDTV
or SDTV. Note: Two video output connectors are provided.
Typically, one output is connected to the television set,
and the other output is used to connect to a home theater
system, DVD recorder, or VCR.
8. Audio Out (L/R) –
Connects RCA-type cables to Audio
Out to send analog audio signals (left and right) to a
television set with stereo inputs or to a stereo amplifier.
Note: Two sets of audio out connectors are provided.
Typically, one set of outputs is connected to the television
set, and the other set is used to connect to a home theater
system, DVD recorder, or VCR.
9. To TV (Video Out) –
Connects to the television.
10. HDMI –
Connects an HDTV HDMI™ (High-Definition
Multimedia Interface) cable from the HDTV to the HDMI
port. HDMI supports both digital audio and video.
11. USB Port –
Connects to external USB equipment approved
by OptiNet.
12. Power –
Connects the DC output of the AC power
adapter (provided) to deliver power to the set-top. Use
only the AC power adapter provided with the set-top.
15