OPTIMUM
M A S C H I N E N - G E R M A N Y
Assembly
Version 1.0.3 dated July 22, 2014
Page 20
Original operating instructions
B30 VGM
US
3
Assembly
3.1
Scope of delivery
Check immediately upon delivery of the machine if there are any transport damages or
shortages. Compare the scope of delivery with the included packing list.
3.2
Transport
WARNING!
Severe or lethal injuries due to machine parts tilting over or falling down from the forklift
truck or transport vehicle. Observe the instructions and indications on the carrier box.
WARNING!
Severe or lethal injuries due to damaged hoisting gear and load suspension gear or
hoisting gear and load suspension which is not sufficiently stable and breaks under
load. Check if the hoisting gear and load suspension gears are of sufficient load bearing
capacity and in proper condition.
Observe the rules for preventing accidents issued by your association for the prevention
of occupational accidents and safety at the workplace or other inspection authorities.
Hold the loads properly.
Never walk under suspended loads!
3.3
Storage
ATTENTION!
In case of wrong or improper storage electrical and mechanical machine components
might get damaged or destroyed.
Store the packaged or already unpacked parts only under the intended environmental
conditions.
Observe the instructions and indications on the carrier box
Centers of gravity
Load suspension point
(Designation of the postions for
load suspension gear)
Prescribed transportation position
(Marking of the top surface)
Means of transport to be used
Weights
