OPTIMUM
M A S C H I N E N - G E R M A N Y
Appendix
Version 1.0 dated 2015-05-27
Page 186
Original operating instructions
F3
GB
12
Appendix
12.1
Copyright
This document is protected by copyright. All derived rights are reserved, especially those of
translation, re-printing, use of figures, broadcast, reproduction by photo-mechanical or similar
means and recording in data processing systems, either partial or total.
12.2
Changes
Any changes in the construction, equipment and accessories are reserved for reasons of
enhancement. Therefore, no claims may be derived from the indications and descriptions.
Errors excepted!
12.3
Storage
ATTENTION!
In case of wrong and improper storage electrical and mechanical machine components
might get damaged and destroyed.
Store packed and unpacked parts only under the intended environmental conditions.
Follow the instructions and information on the transport box:
Consult Optimum Maschinen Germany GmbH if the CNC machine and accessories are stored
for more than three months or are stored under different environmental conditions than those
given here.
"Environmental conditions - operation“ on page 22
Fragile goods
(Goods require careful handling)
Protect against moisture and humid environment
Prescribed position of the packing case
(Marking the top surface - arrows pointing up)
Maximum stacking height
Example: not stackable - do not stack further
packing case on top of the first one.
