OPTIMUM
M A S C H I N E N - G E R M A N Y
808D
Page 105
Test Program
Brief instruction 808D Milling
Operating and Programming — Milling
Test Program
Description
This unit describes how to simulate a part program before executing it in AUTO mode.
Content
Basic Theory
End
Before the part program can be loaded and executed
in AUTO mode, it must be tested using the simulation
function mentioned previously!
Program
Execution
Press the “Execute” SK on the PPU.
The control is now in AUTO mode with the
current opened program storage path being
displayed and the AUTO lamp on the MCP is
on.
Now the program is ready to start and the actual
operation will be described in the next section!
