OPTIMUM
M A S C H I N E N - G E R M A N Y
Safety
Version 1.0 dated 2015-05-27
Page 11
Original operating instructions
F3
GB
Qualified personnel
Thanks to professional training, knowledge and experience as well as knowledge of relevant
regulations the qualified personnel is able to perform the assigned tasks and to independently
recognise and avoid any possible dangers themselves.
Instructed person
Instructed persons were instructed by the operating company regarding the assigned tasks and
any possible risks of improper behaviour.
1.7.2 Authorized personnel
INFORMATION
Sufficient expertise is required for working on the CNC machine. No one must work on
the machine without having the necessary training, not even for a short while.
We recommend the use of the CNC software SinuTrain as an aid for training and
operation.
SinuTrain made by Siemens is the perfect software supplement for the CNC machine F3 of
OPTIMUM.
This training software supports the rapid training for the operation of the control Sinumerik Sie-
mens SINUMERIK 808D. Employees having little CNC-experience can learn the basics of the
DIN-programming by using SinuTrain and are finally able to write and test programs using
SINUMERIK 808D.
Please find SinuTrain and further information on the website of Siemens.
http://www.cnc4you.siemens.com
WARNING!
Inappropriate operation and maintenance of the CNC machine constitutes a danger for
the personnel, objects and the environment.
Only authorized personnel may operate the CNC machine !
Persons authorized to operate and maintain should be trained technical personnel and
instructed by the ones who are working for the operating company and for the manufacturer.
The operating company must
Obligations of
the operating
company
train the personnel,
instruct the personnel in regular intervals (at least once a year) on
- all safety standards that apply to the CNC machine,
- operation of the CNC machine,
- generally accepted engineering standards.
- possible emergency situations,
check the personnel‘s knowledge level,
document training/instruction in a operation book,
require personnel to confirm participation in training/instructions by means of a signature,
check whether the personnel is working safety and risk-conscious and observes the operat-
ing instructions.
define and document the inspection deadlines for the machine in accordance with the Fac-
tory Safety Act and perform an operational risk analysis in accordance with the Work Safety
Act.
The operator must
Obligations of
the operator
be specially trained in handling and programming the CNC machine,
know and understand the program sequence and which effects the individual process
parameters will have,
keep an operator‘s log,
