BLENDER CLEANING AND MAINTENANCE
Read thoroughly the instructions prior to cleaning the machine and follow accordingly.
Please use the cleaning function you have in the preset functions to clean the machine.
Do not expose the base of either jugs to water as both the vacuum pump and the heating element
are built inside the base of the jug. Exposing them to water might damage them.
If you wish you can add some dishwashing soap for the first wash and then repeat the function
with water.
Both the jugs are not dishwasher safe because the vacuum pump is built in the vacuum jug and
the heating pump is built in the heating jug. So please just use the preset cleaning function in
order to clean the jugs.
Always clean the machine immediately after each use.
Do not use scourer, abrasive detergents or corrosive liquids (such as petrol or Acetone) to
clean the machine.
Clean and wipe the machine body and the external of the glass Jug with wet cloth. Never
immerse the body of the machine and the glass Jug into the water or other liquids. Never
sprinkle or wash them under running water. Otherwise the machine will be damaged and
leakage of electricity may occur.
Wash the entire glass Jug assembly and all corresponding parts exposing to food ingredients
during processing with clean water. Empty the glass Jug first.
The blade is extremely sharp, so be careful when cleaning the blade, the glass Jug and all the
relative parts.
Make sure not to touch the blade with bare hands. This may lead to injury. It is recommended
to use the cleaning brush or simply apply the built-in auto Clean function of the Multi-Function
Food Processor.
(Quick wash: Add adequate clean water in the glass Jug. Install the top feeder cover into the glass
Jug lid and lock tightly to form the glass Jug lid assembly unit. Install the glass Jug assembly unit
onto the machine body. Power on the machine. Press the “Function” button and select the “Clean”
function, and then press the On/Off button. This will take the machine enter into the auto cleaning
operation mode. Once cleaning is complete, unplug the appliance, remove the glass Jug from the
machine body, and pour all water out of the glass Jug. Finish off the cleaning by wiping the
machine with a clean cloth or allow itself to dry in the airy environment).
Before keeping the Multi-Functional Food Processor in storage when not in use, make sure the
appliance is clean and dry. Place it in an airy, dry and solar resistant environment.
10
1.
2.
3.
4.
5.
6.
7.
8.