1. The panel has a protec�ve seal to avoid scratches. Please remove it carefully.
2. Plug the blender into main power.
3. Place foodstuff to be blended into jug, star�ng with liquids/so�er ingredients
and then add solids.
4. A�ach the lid, with lid plug inserted, by sealing any side of the lid to the jug’s
edge and pressing down on the opposite side. Make sure the lid and lid plug are
properly in place before you operate the blender.
5. Correctly posi�on the jug on the base.
6. Select your desired func�on - Automa�c or manual.
Note : Adjust temp, �me and speed for cooking func�on
7. Do not add food while the blender is opera�ng,
8. To s�r food during blending, remove the lid plug and insert the tamper tool
supplied with your blender.
NOTE : DO NOT USE TAMPER WHEN CONTENT IS HOT
9. When you have finished blending, switch off the blender and wait for the blade
to come to a complete stop.
10. Once the blade has stopped spinning/ cooking li� the jug from the base.
11. Each �me you need to remove the jug lid, please remove first the lid insert and
then the lid. This is important especially for the vacuum jug as it allows for the
air to go back onto the jug and reduces the pressure. So please always remove
the lid insert first.
12. Pour out the blender liquid, or use a scraper to scrape out the blended contents.
13. We recommend the use of the Vacuum Jug for cold blending, and not for hot blending,
Therefore, we recommend the use of the Cooking Jug for hot blending.
THE JUG.
QUICK START
8