9
COLD BLENDING FUNCTIONS ONLY
USING THE TAMPER TOOL (HARD BASE)
Use the tamper tool to push ingredients into the blades and prevent thick or
frozen mixtures from sticking to the sides of the jug.
When using the tamper tool, the jug should be no more than 2/3 full. Point and move
the tamper to the sides of the jug, rather than in a straight up-and-down motion.
To avoid heating frozen contents; only use the blender in conjunction with the
tamper tool for a maximum of 30 seconds. As friction creates heat, the Froothie
Evolve will raise the contents of the jug by 4 degrees every 30 seconds. If you
blend for too long you will need to add additional ice to freeze the contents again.
When making nut butter, etc. you will need to use the tamper for a longer time and
this will cause no damage to the machine, there will still be the same amount of
heat rise however.
GETTING THE MOST FROM YOUR FROOTHIE EVOLVE
To get the best results, place food in the jug in the following order:
1.
First liquids.
2.
Then soft foods/vegetables.
3.
Last add frozen produce and ice.
To process vegetables:
1.
For best results, cut the food material into small pieces. You do not need to remove peel,
kernels or seeds as the blender will blend these completely.
2.
Put the pieces into the blender jug, and then add water until the jug is 2/3 full.
3.
Securely insert the lid (with the lid plug in position).
4.
Begin blending on SLOW speed and increase to FAST speed until the food is at the desired
consistency.
To process ice:
1.
Place the ice in the jug.
2.
Add water to about three-quarters full and allow the ice to float to the top.
3.
Securely insert the lid (with the lid plug in position).
4.
Begin blending at SLOW speed and slowly increase the speed to FAST until the ice is at the
desired consistency.
TO ORDER REPLACEMENT PARTS PLEASE CONTACT THE SELLER THAT SOLD
YOU THE MACHINE OR YOUR LOCAL FROOTHIE DISTRIBUTOR.