Safety
Version 1.0.3 - 2020-10-13
11
Translation of original instruction
SD351AV
EN
SD351A
V_G
B
_1.
fm
Operator
The operator is instructed by the operating company about the assigned tasks and possible
risks in case of improper behaviour. Any tasks performed beyond operation in standard mode
may only be performed by an operator if they are described in these instructions and if the oper-
ator has been specifically trained to perform them by the operating company.
Qualified electrician
With professional training, knowledge and experience as well as knowledge of respective
standards and regulations, qualified electricians are able to perform work on the electrical sys-
tem and recognise and avoid any possible dangers.
Qualified electricians have been specially trained for the working environment, in which they are
working and know the relevant standards and regulations.
Qualified personnel
Due to their professional training, knowledge and experience as well as knowledge of relevant
regulations, qualified personnel are able to perform the assigned tasks and to independently
recognise and avoid any possible dangers.
Instructed person
Instructed persons were instructed by the operating company regarding the assigned tasks and
any possible risks of improper behaviour.
1.6.2
Authorized persons
WARNING!
Inappropriate operation and maintenance of the metal belt saw constitutes a danger for
the personnel, objects and the environment.
Only authorized staff may operate the metal belt saw!
Persons authorized to operate and maintain should be trained technical personnel and
instructed by the ones who are working for the operating company and for the manufacturer.
The operating company must
Obligations of
the operating
company
train the personnel,
instruct the personnel in regular intervals (at least once a year) on
- all safety standards that apply to the machine,
- the operation,
- generally accepted engineering standards.
check the personnel‘s knowledge level,
document the training/instruction,
have attendance at the training/instruction confirmed by signature and
check whether the personnel is working safety and risk-conscious and observes the operat-
ing instructions.
The operator must
Obligations of
the operator
have obtained a training regarding the handling of the metal belt saw,
know the function and mode of action,
before taking the machine in operation
- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
Additional
requirements
regarding the
qualification
Additional requirements apply for work on the following machine components:
Hydraulic: Only specialists with special knowledge/experience in these areas.
Summary of Contents for 3290360
Page 1: ...EN Operating Instructions Version 1 0 3 Metal band saw Part no 3290360 ...
Page 80: ...Version 1 0 3 2020 10 13 80 Originalbetriebsanleitung SD351AV DE EN SD351AV_wiring diagram fm ...
Page 92: ...Version 1 0 3 2020 10 13 92 Translation of original instruction SD351AV EN SD351AV_GBSIX fm ...