Optimum 3290360, Operating Instructions Manual

Page: 49 / 92

Maintenance
Version 1.0.3 - 2020-10-13 49 Translation of original instruction
SD351AV EN
SD351A
V_G
B
_6.
fm
as required
Sa
w bo
w b
eari
n
g bl
oc
k
Adjusting the
mechanical end posi-
tion
The end position of the saw band (saw bow) shall
be positioned below the support face of the machine
vice.

Adjust the end position of the saw arch with the
screw. Refasten the counter nut after readjust-
ing it.
Img.5-2: End position saw arch
If the metal band
saw and the cool-
ant pump
continue to oper-
ate after the saw-
ing process is
complete.
If the metal band
saw and the cool-
ant pump
switches off before
sawing is termi-
nated.
Adjusting the end
stop switch

Remove the protective cover of the limit switch.
Img.5-3: End stop switch

Turn the screw of the end position switch-off to
the left or to the right so that it meets the end
position switch at the end of the sawing process
(= lower end position). Refasten the counter nut
after readjusting it.

Check the end position of the saw arch. The end
position of the saw arch must correspond to the
switching-off of the end stop switch.

Re-install the protective cover of the limit switch.
Interval / When Where? What? How?
Mechanical
end position
Set screw
Protective cover
End stop switch
Adjustable end posi-
tion switching