Optimum 3290360, Operating Instructions Manual

Page: 23 / 92

Version 1.0.3 - 2020-10-13 23 Translation of original instruction
SD351AV EN
SD351A
V_G
B
_3.
fm
3.2 Scope of delivery
INFORMATION
The metal belt saw is delivered pre-assembled.
When the metal belt saw is delivered, please check immediately that it has not been damaged
during transport. Also check that no fastening screws have come loose.
3.3 Available optional machine accessories
3.3.1 Load suspension point

Fasten the load end material on the
assigned load end positions on the
machine substructure.

Use an adequate conveyor equipment, for
instance a crane.

Make sure that you distribute the loads
evenly so that the metal belt saw cannot
turn over while lifting.

Make sure that no add-on pieces or var-
nished parts are damaged due to the load
suspension.
Img.3-1: Load end
Designation Item number
Saw band set, consisting of:
3357501
Bi-metal saw band HSS, 5 - 8 tooth per Inch; 0°
Bi-metal saw band HSS, 6 - 10 tooth per Inch; 0°
Bi-metal saw band HSS, 4 - 6 tooth per Inch; 6°
HSS bi-metal saw band M 42; 5 - 8 tooth per Inch 3357541
HSS bi-metal saw band M 42; 6 - 10 tooth per Inch 3357542
HSS bi-metal saw band M 42; 4 - 6 tooth per Inch 3357540
Material stand MSR 4 3357610
Material stand MSR 7 3357611
Material stand MSR 10 3357613