28
14
White smoke from
exhaust/flue.
Failed ignition or insufficient fuel amount for good combustion
because;
1) The mixture ratio of air & fuel is not balanced (too much air);
OR
2) Ignition electrodes are malfunctioning; OR
3) Defective fuel pump
1) Check if the fuel filter needs to be replaced and clean all fuel
lines.
2) Clean or replace the ignition electrodes.
3) Check the fuel pump and replace it if needed.
15
Black smoke from
exhaust/flue.
Insufficient oxygen (air) due to:
1) Closed blower fan damper; OR
2) The combustion chamber has built up too much soot.
1) Increase the air intake on the blower fan by opening the
damper. (Loosen tightening screw and use adjusting dial).
2) Loosen the band located at the bottom of the cylinders. Lift
up to remove inner and outer cylinders together. Using a
vacuum cleaner, clean the steam vessel.
(See "Maintenance " on page 15)
16
Blower fan is not
working.
Blower fan will be stopped in 30 seconds when detects every
error.
1) No Power supply or Blown up the fuse
2) Fan motor is damaged
1) Check the electrical Power source then replace the fuse.
(Refer to Guide No.1 figure)
2) Replace the fan motor.