6
Accumulation
● The accumulation function is used to add multiple weights and total them together
● In weighing mode load the first weight, once stable press the TOTAL button (2) to
enter the accumulation mode.
● The screen will flash
“
n001
” followed by the first weight
● Remove weight so the scale is at 0 before adding the second weight to the scale
● Once stable press
the TOTAL button (2)
to add the second weight to the accumulated
total
● The screen will flash
“
n002
” followed by the second weight
● Continue this process until all the weights you want to accumulate are stored
● When you are ready to see the accumulated weight press and hold
the TOTAL button (2) and the ENTER button (6) at the same time
● The accumulated number “
n00
#” (the number of weights you are adding
together) will flash on the display followed by the total
● The total will display by flashing between 2 sets of numbers
● There are 8 digits in total, the display will flash 4 at a time, the first 4 on the left and
the last 4 on the right. For example if the first 4 digits are “0012” and the last 4 digits
are “3456” the actual weight is 001234.56 or 1234.56 lbs/kg
● To exit accumulation mode, wait for the last 4 digits on the right of the screen to
appear, and then press and hold the TOTAL button (2) for one second
● “
CLr n
” will be displayed, asking you if you want to keep the data?
● If NO you do not want to clear the accumulated total, then keep “
CLr n
”.
● If YES you do want to clear the accumulated total, then use the arrow button (4) to
change to “
CLr y
”.
● Finally, press the ENTER button (6) to select exit accumulation mode and return to
back weighing mode
