5
OPERATING INSTRUCTIONS
Power On
● Turn on the power by pressing the power button (1) for 2 seconds. Once on, the
scale will begin to auto-check and count down from 0-9 sequentially before entering
the weighing mode
Note: Anything on the scale before powering on will automatically be tared out.
Zeroing
● The zero function is used only when the scale is empty and is not at gross zero due
to material build up
● Pressing the ZERO button (5) will reset your scale to 0
● Depending on what your manual zero range parameter is set to, you can zero out
any number within your set selection, after that you will receive an error and will
need to tare out the weight
Unit Selection
● To switch between measuring units kg/lb press the UNIT (3) button
Tare Function
● The Tare function is used when you only wish to see the current change in weight,
not the entire amount of weight that is on the scale
● When the indicator is in gross mode (normal weighing) pressing the TARE
button (4) will Tare the current weight on the scale and enter the net mode
(net light shown)
● For example if you are using a container add the container to the scale, press tare
to reset back to 0
● Add your product to the scale to weigh without the weight of the container
● To exit Tare mode press the TARE button (4) again to enter gross mode and you
will see the total weight of the container and the product
Note: If you remove the container the scale will show the minus weight of the container
