snap
into
lip
snap
into
lip
Step 6: Mount CabLED™
34
cabled.optiled.com
A
Position Channeling so lip is at bottom when
installed. Hold Channeling against surface.
Secure with screw every 12 to 16 inches (31-
41cm).
B
Slide CabLED straight into top of Channeling,
and then push down to snap strip into place.
A
Screw Channel Brackets into surface.
B
Starting from PS-Link Connector, press
CabLED strip firmly into each channel bracket.
Make certain strip
lies flat in bracket.
A
Screw Edge Brackets partially into surface.
Start from PS-Link Connector. Slide CabLED
between bracket and surface making sure
it lies flat and the bracket doesn't cover the
LEDs.
B
Adjust placement if necessary when
tightening screws.
Install Edge Bracket
Install Channeling
Install Channel Bracket
