Step 5: Install Connectors
Position Inline On/Off Dimmer Switch between power supply and PS-Link Connector. The Inline Dimmer
uses a keyhole mounting system designed to be mounted vertically.
cabled.optiled.com
31
5.1 Install Inline On/Off Dimmer Switch
5.2 Mount Inline On/Off Dimmer Switch
Test
The Inline On/Off Dimmer Switch fits between the PS-Link Connector and the power supply. The Unplug
the power supply from the AC outlet before connecting. Match the icons on the PS-Link . Connector with
the icons on the Inline Dimmer. Connector with the icons on the Inline Dimmer.
Plug the power supply back into the AC outlet and press the power button on the Inline Dimmer to test.
If it works properly, unplug it and continue. If not, see the Troubleshooting Section.
Power Button: On/Off
Level 5 (max) (shown)
Level 4
Level 3
Level 2
Level 1 (min)
Light Bar Indicator:
+: Increase light level
- : Decrease light level
Dimming Bar:
A
Screw M4 screw partially into surface, leaving
1/4 inch to hang the Inline Dimmer.
B
Fit center of keyhole in back of Inline Dimmer
over screw and slide down to mount.
IMPORTANT:
Disconnect Inline Dimmer fro
mer
mer
m power supply b
ower supply
ower supply efore mounting. Mount near
power supply and off the ground so there is no chance of it being submerged in water.
!
