Opticon PHL 8000 series, User Manual

Page: 78 / 113

Opticon
PHL 8000 series
User Manual
78
3.2.13.
Power
Table 3-28. Power Properties
Icon Item & Function
Battery Tab
•
Provide change level indicators for Main battery and
Backup battery .
•
Provide remaining power capacity of main battery.
•
If a Main Batteries Very Low warning message shows, the
remaining battery life is about 30 minutes before the PHL
8100 shuts down. (See
Figure 3-84: Power Properties:
Battery .)
•
To exit the Battery control panel, tap OK from the
command bar, or tap the <Enter> key on the keypad.
Schemes Tab
•
The Schemes Tab allows you to determine the time to
Switch state to Suspend mode when using either Battery
Power or AC Power .
•
Select Battery Power or AC Power as the power scheme
from the pull-down list.
•
Select the time to suspend mode from the pull-down list.
(See Figure 3-86: Power Properties: Switch state to
Suspend .)
Device Status Tab
•
Provide power level of device—The power level ranges from
High (D0) , which means the device is at the highest power
level, to Off (D4) , which means the device is at the lowest
power level.
NOTES:
•
This icon inside the Task bar shows that the AC adapter
is providing power to the PDT.
•
This icon inside the Task bar shows that Main Batteries
are providing the power to the PDT.
•
This icon inside the Task bar shows that the AC adapter
is providing the power to the PDT and is charging the main
batteries.