Opticon
PHL 8000 series
User Manual
112
6. Appendix A – Enabling GPRS Module
Use the PDT with integrated GPRS module to send data. You can connect to the Internet or
work network over GPRS (General Packet Radio Service).
6.1. Inserting a SIM Card
A SIM (Subscriber Identity Module) card is required to operate the GPRS communication
features on your PDT.
NOTE:
If the battery is already installed, you must remove it before inserting the SIM
card.
To insert the SIM card into the PDT:
1. Remove the battery cover and battery.
2. Push the metal latch forward to unlock and lift the SIM holder.
3. Insert a correctly oriented SIM card into the SIM holder.
4. Put down the SIM holder and push the metal latch backwards to lock it.
5. Place the battery and battery cover back.
6.2. Setting up a GPRS connection
1.
Tap the phone icon in the system tray twice.
2. A GPRS power control window is displayed.
You need to select "Enable GPRS Module" and tap the OK button.
3. After a few seconds you might be prompted to input a PIN code and tap the OK
button (only if PIN code is configured).
Summary of Contents for PHL 8000 series
Page 22: ...Opticon PHL 8000 series User Manual 22 2 1 2 PHL 8200 Figure 2 6 PHL 8200 overview ...
Page 75: ...Opticon PHL 8000 series User Manual 75 Figure 3 80 Owner Properties Network ID ...
Page 81: ...Opticon PHL 8000 series User Manual 81 Figure 3 90 Regional and Language Settings Input ...
Page 84: ...Opticon PHL 8000 series User Manual 84 Figure 3 94 Stylus Properties Calibration ...
