Opticon
PHL 8000 series
User Manual
43
Diags Tab
Figure 2-23: Diags tab
•
(Re)connect
: Disable and enable the radio, apply or reapply the current
profile, and attempt to associate and authenticate to the wireless LAN,
logging all activity in the output area at the bottom.
•
Release/Renew
: Obtain a new IP address through DHCP release/renew,
and log all activity in the output area at the bottom.
•
Start Ping
: Start a continuous ping to the address in the edit box next to it.
Once the button is clicked, its name and function will change to Stop Ping.
Moving to an
SCU
window other than Status or Diags also will stop the
ping. Pings will continue until you tap the
Stop Ping
button, move to an
SCU
window other than Diags or Status, exit
SCU
, or remove the radio.
•
Diagnostics
: Attempt to (re)connect to an AP, and provide a more
thorough dump of data than is obtained with (Re)connect. The dump will
include radio state, profile settings, global settings, and a BSSID list of
APs in the area.
•
Save To...
: Save the diagnostics output to a file.
Summary of Contents for PHL 8000 series
Page 22: ...Opticon PHL 8000 series User Manual 22 2 1 2 PHL 8200 Figure 2 6 PHL 8200 overview ...
Page 75: ...Opticon PHL 8000 series User Manual 75 Figure 3 80 Owner Properties Network ID ...
Page 81: ...Opticon PHL 8000 series User Manual 81 Figure 3 90 Regional and Language Settings Input ...
Page 84: ...Opticon PHL 8000 series User Manual 84 Figure 3 94 Stylus Properties Calibration ...
