Opticon PHL 8000 series, User Manual

Page: 70 / 113

Opticon
PHL 8000 series
User Manual
70
3.2.9.
Network and Dial-up Connections
Table 3-24. Network and Dial-up Connections
Icon Item & Function
Connection Tab
•
To create a Dial-up Connection .
o
Double-tap the Make New Connection .
o
In the Make New Connection dialog box, enter a
name for the connection.
o
Select Dial-Up Connection .
o
Select the Next button.
o
Select the modem you want use.
o
Select Configure .
o
Under Connection Reference , use the default
settings provided. If you can’t connect using these
settings, see your ISP or network administrator for
specific information. If you want to always enter a
phone number before connecting, select
Manual
Dial . Select OK .
o
Select TCP/IP Settings . In the General tab, ensure
Use Server-assigned IP address is selected. In the
Name Servers tab, ensure Use Server-assigned
addresses is selected, and select OK . If you are
unable to connect with these default settings, see
your ISP or network administrator for specific TCP/IP
information.
o
Select the Next button and type the telephone
number.
o
Select the Finish button.
The connection you just created appears as an icon in the
Network and Dial-up Connections folder.
•
Set up a Point-to-Point Protocol (PPP) account with an ISP
and obtain the following information:
o
Access telephone number
o
User name
o
Password
•
Once you have established an account, create a new
connection on your device. When creating this connection,
you should be able to use all of the default TCP/IP settings
provided in the
Make New Connection wizard. If you can’t
connect using the default settings, contact your ISP or
access your ISP’s Web site for specific TCP/IP information,