Opticon
PHL 8000 series
User Manual
48
2.5.2.
Resuming
Use one of following methods to resume (wake up the PDT):
•
Press
the
<Power>
key to suspend or resume (wake up).
•
Put the PDT into a dock.
When a battery pack completely discharges while the unit is in suspend mode, the
PDT remains suspended until the discharged battery condition is corrected.
2.6. Resetting the PDT
2.6.1.
Soft (Warm) Reset
A warm reset is a transition from the on, idle, or suspend power state that closes
all applications and clears the working RAM, but preserves the file system.
Reason for a Warm Reset
: If an application “hangs,” initiate a warm reset to
terminate the application only.
Process for a Warm Reset
: Press the
Reset
button on the back of the PDT.
After a Warm Reset
:
•
The desktop appears with the application shortcuts on the screen.
•
The custom settings in the registry are persistent.
2.6.2.
Hard (Cold) Reset
1. You can use a Cold Reset to initiate the device if WINCE.NET OS locks up or
Warm Reset does not work
2. To perform a Cold Reset, press the
Power
button on the front and the
Reset
button on the back simultaneously.
3. The device will reboot after a Cold Reset.
CAUTION:
It is best to use only the warm reset. Try a warm reset before you
initiate a cold reset. All applications will be closed and working RAM and all files
will be cleared if you initiate a cold reset. Before a cold reset, back up your files to
Flash ROM, Flash Card, or PC.
Summary of Contents for PHL 8000 series
Page 22: ...Opticon PHL 8000 series User Manual 22 2 1 2 PHL 8200 Figure 2 6 PHL 8200 overview ...
Page 75: ...Opticon PHL 8000 series User Manual 75 Figure 3 80 Owner Properties Network ID ...
Page 81: ...Opticon PHL 8000 series User Manual 81 Figure 3 90 Regional and Language Settings Input ...
Page 84: ...Opticon PHL 8000 series User Manual 84 Figure 3 94 Stylus Properties Calibration ...
