Opticon NLV-5201 User Manual Download Page 107

Page: 107 / 172

Chapter-9

Code Options

NLV-5201 User's Manual

1st

Positive and Negative Image of Barcodes (1D code common)

9.2.2

Normally, the barcode is printed in black on white background, but there a case with white on black
background. Black on white background is called normal (positive) barcode and white on black
background is called negative barcode.

Positive Image of Code 128

Negative Image of Code 128

Following are the positive and negative barcode reading setting.

Code

Item

Command

Description

Default

Positive and
Negative
Image of
Barcodes

[DLA

Decode positive bar codes only.



Decode negative bar codes only.

Decode positive bar codes and negative bar codes.

* It is strongly recommended to enable only the required codes and options for best reading performance.

Summary of Contents for NLV-5201













































































































































































Search results

Summary of Contents for NLV-5201

Reviews:

Related manuals for NLV-5201

Brands by name

Popular brands

Opticon NLV-5201, User Manual

Search results

Summary of Contents for NLV-5201

Reviews:

Related manuals for NLV-5201

Brands by name

Popular brands