Chapter-2
Before Using
NLV-5201 User's Manual
15
1st
Detailed View
2.6
No.
Name
Description
1
Scan Window
Light paths of the imager, LED illumination and aiming. Ensure that
the lens is free from dust and dirt before scanning.
2
Mounting Holes
Screw holes that can be used to mount the scanner. Two holes on
the bottom and side. Refer to the mechanical drawing for the
mounting holes dimension.
The screw hole is M3, effective depth 3.5mm.
3
Control Panel
Control panel to execute Test mode, Tuning mode and Aiming mode.
Can also select the bank.
4
Buzzer Holes
Sound from a built-in buzzer comes out through these holes. When
they are covered, the buzzer sound will be diminished. The sound
varies depending on the settings. Buzzer sound settings are
configurable for frequency, loudness and duration.
5
Status LEDs
Indicates status by the combination of 3-color LEDs (red, orange,
green).
Refer to 2.7.3 LED Indicator Specifications for detail.
6
Trigger Key
Default is trigger key. When selecting mode, it operates as execution
key.
7
Mode Key
The key to select and cancel the mode.
Shift to bank select mode by long press.
Mode key can be disabled, refer to 3.3.9 for detail.
X X X X X X
2. Mounting Holes
1. Scan Window
4. Buzzer Holes
7. Mode Key
6. Trigger Key
5. Status LED
3. Control Panel
