Chapter-7
Tuning and Bank Function
NLV-5201 User's Manual
81
1st
Bank Function
7.4
Various setting parameters can be registered to bank No.1-7 in bank function. Registering bank
according to operation is possible.
Parameters that can be registered to bank:
Tuning value, Read code setting, String option etc.
Parameters that cannot be registered to bank: Interface setting, Read operation setting etc.
Bank Selection
7.4.1
Initial value of the bank operates at No.1. To select bank, use the following setting.
Item
Command
Description
Default
Bank
selection
[BRA
Qa
Qb
Select bank ab
Effective value: a=0, b=1-7
a=0, b=1
Bank Specify Trigger
7.4.2
The bank specify trigger operate as a combine of bank selection and trigger “Z” command. This allows
executing with 1 command.
Item
Command
Description
Default
Bank
selection
[TRG
Qa
Qb
Bank specify trigger*
Effective value: a=0, b=1-7
a=0, b=1
* To end reading, use “Y” command just like “Z” command.
Confirm Current Bank
7.4.3
To confirm current bank number, use the following setting.
Item
Command
Description
Remark
Confirm
current bank
[DGQ
Display the current bank with 2 digits (00-07).
*
* When in default and bank initialized, “00” as bank default will be displayed.
Initialize Bank
7.4.4
Item
Command
Description
Remark
Initialize
Bank
[BRB
Qa
Qb
Initialize bank ab setting parameter
Effective value: a=0, b=1-7
*
[BRC
Initialize all banks setting parameter.
*
* Settings that are not included in the bank parameters will not be initialized.
* When bank is initialized, the scanner operates with the default bank as long as bank with effective parameter is not selected.
